Ajax streetsiren street siren commission, black

A siren is one of the main devices of a security system, which should instantly scare away intruders and draw the attention of others to the events that occurred at the protected object with a loud sound and light signal. The device significantly increases the level of protection of the object and will protect your property.

Wireless siren with LED frame for indoor and outdoor use StreetSiren Jeweller notifies about:

• anxiety;
• entry/exit delays;
• change of security mode;
• opening the door.

StreetSiren Jeweller has a high volume level and will be visible and audible at great distances. The device successfully copes with its work both in private homes and in large industrial facilities, shopping malls, etc. The siren reports the intrusion of intruders, and also works in case of emergency events: fire, flooding, etc.

The siren's sound and light signal is activated after one of the sensors detects an alarm. The alarm is signaled by a buzzer and LEDs. The siren is activated in less than a second as soon as the device detects an alarm. The siren is protected by a tamper button, so the device cannot be torn off the surface or damaged. Any attempt to remove it from the mounting panel or open the case will be known to the user and the security company in a few seconds. An attempt to dismantle, move the device, or tear it off the surface is recorded by an accelerometer, and the user will instantly receive a notification about the event. The device also notifies of jamming attempts thanks to radio frequency hopping and is protected by authentication against substitution.

Notifications about loss of communication with the siren are sent to the user within 36 seconds, depending on the settings.

The transmission of commands, events and alarms is protected by the proprietary Jeweller radio communication protocol. The protocol protects data through two-way radio communication between security system devices. Block encryption with a floating key guarantees the storage and timely transmission of data to the user. The protocol protects data from sabotage and instantly delivers alarm messages.

In the absence of obstacles, the radio communication distance between the siren and the hub is 1,500 m.

The siren has a high volume of 85 to 113 dB, and the sound signal sounds from 3 seconds to 3 minutes. The siren transmits the signal via radio waves. You can configure the siren to operate silently and then the device will notify about the alarm only with the help of light indicators. The security system devices from which the siren will receive and transmit the alarm signal are selected by the user in the application. The volume level and duration of the sound are configured in the application.

The sealed housing of the StreetSiren Jeweller allows it to be installed outdoors without additional covering. The device has an IP54 housing protection class. It is protected from rain, snow, dust, and splashes. The siren can work equally well in hot and cold weather, as it can withstand temperatures ranging from +50°C to –25°C.

The pre-installed battery of the StreetSiren Jeweller works without interruption for 5 years. When the charge level drops to 20%, the user will receive a notification reminding him to replace the battery. The siren can be connected to an external power supply. So the user can decide what the main power supply of the device will be: external or from batteries.

To install the siren, you do not need to disassemble its case. The battery is already inserted into the device. The SmartBracket mounting panel will help you quickly and easily attach the device to the surface. The siren should be placed at a height of 2.5 m and above. This height makes it difficult for unauthorized persons to access the device. When installing the siren, you should take into account its distance from the hub and the presence of obstacles that may prevent the free passage of radio communication. These are obstacles such as walls, metal ceilings, large-sized objects. If the signal level is shown in one division, then you should move the siren by 20 cm and check the signal level again. If moving does not help, you can use a repeater, which will significantly improve communication. All conditions for placing the StreetSiren Jeweller siren are indicated in the instructions.

If the siren is installed correctly, it will not be easy to dismantle and turn off the device that has triggered. The siren has a sturdy housing, and the buzzer is protected by a metal mesh. In case of alarm, the on/off button is blocked.

The siren should not be placed closer than 1 m to the hub, as this may cause errors in the device's operation. It should also not be mounted near metal devices and mirrors, as these things can shield the radio signal and cause it to attenuate.

StreetSiren Jeweller connects to the hub in one click using a QR code via an application on your phone or PC. The siren is easy to control and easy to change the device settings. In the absence of obstacles, the radio communication distance between the siren and the hub is 1,500 m.

The siren is available in black and white. The device comes with a SmartBracket mounting panel, a mounting kit, 4 pre-installed CR123A batteries, and a short instruction manual for use and installation. The device has a 24-month warranty.

StreetSiren Jeweller significantly increases the level of security of the facility, does not require a wired connection, works over a secure radio channel, is easy to install inconspicuously, and installing the device does not require special knowledge.

You can purchase StreetSiren Jeweller in the online store ComfortLife.MARKET. The price of the product is indicated on the side of the photo and is valid. We deliver security system devices to all cities of Ukraine.