Ajax MotionCam Outdoor - street motion sensor with photo and video recording (commission)

Description Ajax MotionCam Outdoor

The MotionCam Outdoor Jeweler wireless street motion sensor with a camera for alarm verification is used to protect the territory, fix the movement of objects on it, determine the intrusion of outsiders and send a message to the user about a real threat.

MotionCam Outdoor Jeweler is an outdoor sensor with a protected housing against adverse weather conditions: wind, snow or rain. The housing of the sensor is protected by a special canopy Ajax Hood , which is included with the device.

MotionCam Outdoor Jeweler has a built-in camera. Its wide-angle lens is capable of covering the entire protected area. The sensor determines the intrusion thanks to infrared sensors, recording the movement of objects that have a body temperature close to that of a person.

The two-stage LISA algorithm analyzes signals from two independent IR sensors. When both sensors have detected movement and sent a signal, LISA performs correlation and spectral analyzes of the received signals and distinguishes a real threat from a false one. That allows you to avoid false sensor activation. With the selected setting, the device does not respond to animals up to 80 cm tall.
The sensor recognizes people and other objects as heat spots. If the temperature of the spot is close to the human body, the device reports an alarm and sends a message to the user's application. Temperature compensation helps the sensor to accurately determine the movement of the spot as the movement of a person, which prevents the occurrence of false alarms.

The sensor will trigger an alarm when both infrared sensors detect motion. At the same time, the video camera will take from 1 to 5 pictures depending on the settings and send them to the application. The speed of sending photos depends on the photo resolution you have chosen in the settings, the signal strength of Jeweller and Wings , and the speed of the Internet.

The device recognizes the appearance of strangers on your territory from the first steps of the intruders and will confirm the fact of the invasion with a series of photos. Photo verification helps to react to the situation instantly, will save you from unnecessary worry, and the employees of the security company from visiting the facility in vain. The resulting pictures will serve as proof of the invasion, and if they are available, you will know the signs of intruders and be able to provide them to law enforcement agencies.

The user can also monitor the protected area by selecting the photo-on-demand function in the sensor settings. At any time of the day, you can take pictures of the area where the MotionCam Outdoor Jeweler is installed.

The coverage range of the object movement sensor is set manually at a distance of 3 to 15 meters, which allows you to accurately set the detection zone and avoid triggering the alarm of the sensor on the movement of bushes or trees.

MotionCam Outdoor Jeweler cannot be silently disabled or disabled. Masking sensors built into the device clearly react to hanging, painting or other obstacles. When there was an unauthorized intervention in the operation of the device, the program detects the lack of communication and informs the user about it in 1 second.

The sensor transmits data using two protected radio protocols, Jeweler and Wings . The first helps to transmit an alarm signal in 0.15 seconds, and the second is responsible for fast and secure transfer of photos to the user's application and their secure storage. The first photo is sent to the application 9 seconds after the alarm notification under the standard settings of the device. Communication with the central panel of the hub by the sensor is maintained at a distance of 1,700 m.

The 4 batteries installed in the device have a guarantee of uninterrupted operation for up to 3 years. The sensor itself will inform you about the need to replace the batteries as soon as they start to fail. The quality of each battery is checked by the sensor manufacturer.
MotionCam Outdoor Jeweler is easy to set up and integrate into your overall security system. To do this, you need to scan the QR code, add the sensor to the hub and give it a name and a room. Configures the sensor from within the application using detection zone and signal level tests. The device can be easily reconfigured and turned off without having to be close to it.

Reliable optics of the built-in HDR video camera, high-speed processor and software algorithms enable the sensor to take high-quality photos day and night in any lighting and regardless of the vagaries of the weather. Its functionality will not be hindered by sunlight that falls directly into the video camera lens, light from street lamps or surfaces that reflect various light sources. The transmission of colors in too bright light is provided by an infrared filter, and two infrared LEDs ensure a clear image even in complete darkness.

Its competent installation by an installation specialist will help ensure high-quality and reliable operation of the sensor. The manufacturer recommends installing the device at a height of 0.8-1.3 meters above the ground level on the wall of the house or on the fence.

It is not recommended to install the device:

near metal objects and mirrors;
tall bushes and trees;
in places with a low signal level;
at a distance of 1 m from the hub.

The sensor comes with the device itself, the Ajax Hood protective canopy, the SmartBracket panel for attaching the device to the surface, the installation kit and the instructions. The sensor works in the temperature range from -25 to +60.
MotionCam Outdoor Jeweler Wireless Outdoor Motion Sensor for Alarm with Camera to Detect Alarms will be your best choice to realize your desire to protect your own home, office or other property, even when intruders approach the premises.

Advantages of MotionCam Outdoor Jeweler wireless outdoor motion sensor with camera for alarm verification:

instantly detects the movement of outsiders on the territory it protects;
the built-in video camera takes from 1 to 5 pictures during an alarm and sends them to the user;
you will get high-quality pictures regardless of the time of day and weather conditions;
works in the operating temperature range from -25 to +60;
infrared sensors work on objects with a temperature similar to that of a person;
temperature compensation saves the user from false alarms, and security companies from unnecessary trips to the object that raised the alarm;
the body of the device is protected by a special Ajax Hood canopy from snow and rain;
the sensor cannot be imperceptibly disabled or disabled;
the device has easy configuration and clear management;
three levels of sensitivity are available.

MotionCam Outdoor sensors require a Hub 2 or Hub 2 Plus!

You can buy the MotionCam Outdoor Jeweler wireless street motion sensor with a camera for alarm verification in the ComfortLife.MARKET online store. The price of the product is indicated on the side of the photo and is valid. We deliver sensors to all cities of Ukraine.

Characteristics Ajax MotionCam Outdoor