Ajax MotionProtect Outdoor - external motion sensor (commission)

Description Ajax MotionProtect Outdoor - external motion sensor (commission)

Street motion sensor - designed for outdoor installation, the main task of which is to detect human movement in the area of effect and automatically respond to a potential threat by sending an alarm signal to the control center, which in turn sends a corresponding message to the application on your phone or to the security company's remote control. Street motion sensors are widely used for security both for private purposes and for business protection, etc.

With a street motion sensor, you can be sure that intruders will not enter the yard of your private home or business and will not cause damage to the property, and if they do, you will immediately receive a notification or the alarm will go off.

One of the best motion sensors used for domestic and commercial purposes is the MotionProtect Outdoor Jeweller outdoor motion sensor with advanced anti-masking and animal immunity.

This is a street motion sensor that works thanks to a system of two PIR sensors and a two-stage LISA ( Live Intelligent Spectrum Analysis ) signal analysis algorithm developed by the manufacturer Ajax . Despite numerous obstacles that can interfere with the sensor's operation on the street and cause false alarms, the sensor 100% responds to the appearance of a person and does not trigger in case of fictitious threats.

The signal received by the sensor is analyzed by the device in two ways: correlation and spectral analysis.

During correlation analysis, the LISA algorithm, having detected motion, analyzes it in real time, compares the shapes of the two signals and if they are similar, reports an alarm. During spectral analysis, when two PIR sensors detect motion, but correlation analysis shows that it does not have sufficient similarity, LISA compares the frequency components of the signals of the two sensors.

The MotionProtect Outdoor Jeweller outdoor motion sensor is equipped with a tamper and an anti-masking system that works constantly.

The tamper will not allow you to open the device, break it, or tear it off the surface if attackers have entered your territory, and your application will immediately receive a push notification about an attempt to hack the sensor.

The anti-masking system is calibrated when the sensor is installed on the surface. It analyzes the surrounding space and as soon as the sensor is painted over or an obstacle appears in its viewing sector, the sensor instantly perceives this as sabotage and raises an alarm.

The sensor operates on the Jeweller radio protocol, has a secure two-way radio connection with the hub at a distance of 1,700m, block encryption and authentication during each connection with the hub, which protects it from sabotage, substitution or data theft. The alarm signal delivery takes 0.15 seconds. The radio protocol increases the energy efficiency of the device - it works for years from the installed complete batteries.

The outdoor motion sensor with advanced anti-masking and animal immunity MotionProtect Outdoor Jeweller will work in any weather. Temperature changes and adverse weather conditions do not affect the quality of its work. The device withstands heat up to + 60 ° C and frost down to - 25 ° C. Protected from dust and splashes.

The sensor's battery will provide uninterrupted operation for five years. When the battery needs to be replaced, the sensor will notify you via push notification.

If you plan to install the sensor outdoors, you should purchase a Hood canopy along with it, which will protect the device from snow or rain. If the sensor is mounted under a roof, a canopy is not needed.

The installation of the MotionProtect Outdoor Jeweller outdoor motion sensor with advanced anti-masking and animal immunity must be carried out by a qualified installation engineer to guarantee its high-quality operation and avoid false alarms. This requires an understanding of the features of the surrounding landscape, calculating the likely paths of intruders and anticipating possible obstacles, and avoiding blind spots during installation. To properly install the sensor and ensure its effective operation without false alarms, contact certified Ajax partners.

But you can connect the sensor to the hub yourself. To do this, you just need to scan the QR code. The SmartBracket mounting panel allows you to install the sensor without disassembling the housing. The sensor is tested and configured in the mobile application.

Advantages of the outdoor motion sensor with advanced anti-masking protection and animal immunity MotionProtect Outdoor Jeweller :

- the best sensor for domestic and commercial purposes;

- 100% recognizes a person and does not respond to false alarms;

- has 100% protection against hacking thanks to the configured temper and anti-masking system;

- protection against data tampering or theft thanks to the Jeweller radio protocol;

- works in any weather;

- battery life up to 5 years;

- easy and simple setup and testing in the mobile application.

Your safety and the safety of your property primarily depend on the quality and efficiency of the security and protection system devices. Protect your private territory or business property with the MotionProtect Outdoor Jeweller outdoor motion sensor with advanced anti-masking and animal immunity. It is the first line of defense for your home or business against intruders.

You can purchase an outdoor motion sensor with advanced anti-masking protection and animal immunity MotionProtect Outdoor Jeweller in the online store ComfortLife.MARKET . The price of the product is indicated on the side of the photo and is current. We deliver sensors to all settlements in Ukraine.

Characteristics Ajax MotionProtect Outdoor - external motion sensor (commission)